Return to Ping Pong Experts.
Butterfly Tenergy 80
Help us keep the best prices! Report a lower price.
Free US Shipping
TENERGY: Ideal Balance between Spin and Speed
• Tenergy 80 is the ideal balance between spin and speed
Class: Super Speed
Review by TableTennisDaily.co.uk:
Customers who purchased Butterfly Tenergy 80 also purchased:
Rubber FAQ and Guide - what you need to know when buying rubber sheets.
Compare rubber ratings - compare ratings to other sheets.
Best Price Guarantee
We guarantee to have the lowest prices (shipping included) in the US. Please tell us if you see a lower price.
Reviews of Butterfly Tenergy 80 (74)
9.4/10 for OFF style. FH: Butterfly Dignics 80, 2.1mm, 47g (0.23g/cm^2), 40 degrees (Shore A). BH: Butterfly Tenergy 80, 2.1mm, 47g (0.23g/cm^2), 36 degrees (Shore A). Blade: Donic Waldner OFF World Champion 89, 85g, 157mm x 150mm x 6.9mm (Width x Height x Thickness). Plies: 7 (5 Wood + 2 Composite): Spruce - Spruce - ZLC - Kiri - ZLC - Spruce - Spruce.
Blade: Butterfly Viscaria
FH : Hurricane 3 Neo 41 degree 2.2mm
BH: Tenergy 80 2.1mm
So Ive been using the Tenergy 80 for a few months now, which was a transition from the Tenergy 05.
Tenergy 80 is faster than the 05, this is noticeable close to the table and at mid distance . The ball shoots off the blade quicker, and the trajectory is more linear. The spin is a little less than the 05 , which is especially noticeable for slower loops close to the table . Away from the table, the difference is less noticeable.
This rubber is excellent on the backhand , especially for backhand flicks & topspins. Because of the straighter trajectory, over the table the BH shots have an almost punching-like effect that makes it difficult to be returned. When the rubber is fully engaged, it gives a responsive clicky sound which I liked .
One contention I had with the Tenergy 05 was that lifting backspin was difficult especially close to the net because of the high throw angle, which meant you had to keep the angle closed. The result is a small margin for error where you have to both lift the backspin by brushing up , but keep the angle closed. With the Tenergy 80 , it is easier to lift backspin imo with the lower throw angle and it feels less responsive to spin in general .
The transition from 05 to 80 felt very natural , its like the 05 but easier to use, less sensitive to spin, with a little more speed and a little less spin on slow brushing strokes. It doesnt have the signature catapult effect of the 05, so the sudden-ness is lost. Instead it has a more balanced speed throughout.
Overall very satisfied with Tenergy 80 for the BH . Only contention is I wish it had a tad more spin . Might try the Dignics 05 in the future, but currently very satisfied!
If you have any questions, feel free to ask . Cheers!
Speed: MX-P > Tenergy 80 > Tenergy 05 > H3 Provincial > H3 Neo = H8 Hard
Spin: H8 Hard > H3 Provincial > H3 Neo > Tenergy 05 > Tenergy 80 > MX-P
This rubber actually have more spin than the tenergy 05 , I don't know is that has to do with my style.
Spin (European Style): 9
Weight: 47g in 2.1 (0.23g/cm^2)
Hardness (DHS): 36
Fast Loop: 9.1
Slow Loop: 9
Counter Loop: 9
Available Sponge Thickness: 1.7/1.9/2.1
I am using since few time this rubber on my Donic Waldner Legend Carbon, on FH, replacing a Donic Bluestorm Z2. I was looking for a softer rubber, which could make me feel more the ball. The Bluestorm, I think, is a good rubber but too hard for my blade. Well, now I am incredibly satisfied. I feel like touching the ball, I feel more spin in my strokes, speed is super good for me, the control is incredible. I feel more sure, I feel to attack with more consistency, close to the table and at a mid distance. I think the combination with my blade works really fine.
Ratings for 2.1mm. Played for 1 year with Tenergy 80 on forehand and Tenergy 05 FX on backhand of Timo Boll ZLF. Tenergy 80 is a more tamed version of Tenergy 05. There is less spin and the speed is about the same. You can use it on either backhand or forehand with good results. 80 plays virtually the same as 05, except 05 flies higher on loops with more spin, 80 is more direct. 80 is a bit lighter at 47g vs 49g for 05 in 2.1. 80 is better than 05 if you block more than you loop.
Best tenergy out of all. Very similar to 05, a bit more control and spin but slightly less speed.
Great rubber. It's not perfect in one thing but good in everything. Good in Topspin and blocking/ smashing. It does not create the same amount of spin like the t 05 but it's very spinny. On the other hand it's much easier to handle incoming spin, to block or to smash. The control is really great for an Off rubber.
Like it's official description says, T80 has the perfect balance among the Tenergys in terms of speed and spin. The touch is also excellent, good precision and has a good throw angle. It's an excellent rubber, I'm currently using it on forehand in a Primorac Carbon Cpen, fitted well with it.
Best bh rubber ive tried. Very consistant, go 2.1 sponge you will not be disappointed.
I have only had this rubber for 6 weeks, so I don't know much yet and I don't like to say much without thorough testing. I will say at this point I really,, really like this rubber. My favorite rubber to date has been the tenergy 05, but this rubber rivals it. It is actually a lot like 05 to me, yet I notice a substantially lower arc and, seems to have a noticeably less spin and response to incoming spin. Other than that, it is probably faster with a little more dwell time than the 05.
IT IS REALLY fast when you hit the ball hard and clean!!
Tenergy 80 is a well rounded offensive rubbers with good spin and speed. I tried this on my backhand and feel the rubber is very good for short flicks and drives and is good for blocking. Despite its fairly low sensitivity to incoming spin, it itself is able to generate a great deal of spin on pushes and especially serves. It plays best at mid-distance and away from the table whether blocking or counter looping.
Pushing close to the table will require an adjustment due to the Spring Sponge's propensity to pop the ball up (though a lot of backspin is generated). The main limitation I found with this rubber is power loops on the backhand side are difficult to execute close to the table due to the springiness of the sponge but work great away from the table. I also had a few hits with it on the forehand side as well and also works well there with 3rd balls being a bit easier to execute compared to backhand. I briefly tried T80 with a 7-ply Carbon blade but found it played much better on a 5-ply OFF wood blade as I found it to be too bouncy on the Carbon blade, though this could also be to do with my level.
Overall a very solid rubber and good introduction to the Tenergy series. T80 is great for attacking short balls but when those fail, your rallies and game winners will come from mid/away from the table. I would recommend this to intermediate to advanced players who aren't particularly fussy but want a stable rubber that gives them that extra kick. T80 is many ways better than its FX counterpart as it offers far greater spin, speed and more gears at the cost of slightly worse blocking, pushing and control.
A cut sheet (normal sized Stiga head) weighs 46g which is a bit heavier than the FX at 43g and classic Sriver at 42g. I'd put the hardness of T80 between the two being harder than FX but a bit softer than Sriver.
I played with this on a 5-ply OFF blade - Stiga Eternity VPS.
My playstyle is backhand dominated two-winged shakehand looper.
You want speed? This will give you speed. It also provides a descent amount of spin and control. I would consider this more of a mid range player, not close.
My rate is middle not because the rubber is bad but for my style and blade, it was not so good. I'm a penholder with Ryu See Ming blade, so this one was not very good for looping and being fast as the Tenergy 5.
Speed: high (9.4).
Spin: high (9.3).
Control: average (9.1).
Tackiness: slightly tacky (2).
Weight: medium heavy (47g, 0.23g/cm^2).
Sponge hardness: medium (49/36).
Top sheet hardness: hard (56/44).
Gears: average (5).
Throw: medium high (6.2).
Consistency: always identical (9).
Durability: average durability (5).
Top sheet thickness: average (1.6mm).
Surface thickness: average (0.7mm).
Pip length: medium (0.9mm).
Pip width: average (1.7mm).
Pip spacing: average (0.7mm).
Overall: good (9.5).
Value: expensive (4).
The closest rubber to Tenergy 05 out of all rubbers. The slightly softer top sheet of 80 makes it less sensitive to spin, which is better for pushing and blocking. Slightly less dense pips and softer top sheet gives a slightly lower throw angle, but makes it easier in counter looping because the racket angle can be more open. The speed of 05 and 80 is very similar, but 80 takes a more direct trajectory (higher horizontal speed) due to lower throw angle.
Table Tennis Rubber