|
Donic Waldner Senso Carbon V1by Donic
· Part of Donic Senso blades
Help us keep the best prices! Report a lower price.
Free US Shipping
Perfect blade for attackers as well as aggressive allround players. This model is based on the famous Donic Allplay that is one of the best-sellers in the world. Two additional Carbon layers combines the unique characteristics of the high-tec component Carbon with the time-proven Swedish allround construction. The result is fantastic speed and control in an ideal balance. Includes the Senso V1 hollow handle technology. An elastic component of this blade gives you the essential feedback of the bounce of the ball. Class: OFF- Customers who purchased Donic Waldner Senso Carbon V1 also purchased:
Blade FAQ and Guide - what you need to know when buying a blade. Compare Blades - blade rating comparison chart. Blade Weight Variations - Actual blade weight may vary by up to 8g.
Best Price GuaranteeWe guarantee to have the lowest prices (shipping included) in the US. Please tell us if you see a lower price.
Reviews of Donic Waldner Senso Carbon V1 (41)
29,October ,2019:I use anatomical Handle,which is great for BH.Rubbers=Nanoflex ft 48+Rakza 7 soft(great BH rubber,very spinny).Blade is a blockers dream.Great flex,nice feeling in hand(ball hitting blade),no annoying vibrations.Control is less than Joola Rossi emotion.
Ratings for 86g. Nice pace, not as fast as other composite blades. It's limba, ayous, carbon, ayous, 5.8mm.
Great blade
I am an intermediate attacking player, Omega VII Euro 2mm on FH and Musa I max on BH Great control, Nice spin, very polyvalent, you can do all kind of shots You will have enough power to be decisive, don't worry I usually swap with Xiom Musa asia blade depending if I want carbon touch
I play with donic baracuda 2.0mm on both side. Weigh IS 177g. This combination is good for attack game.
Plies: 7 (5 Wood + 2 Composite)
- 2 * Limba 0.5mm - 2 * Ayous 0.6mm - 2 * Carbon 0.1mm - Ayous 3.4mm Width: 155mm Height: 151mm Thickness: 5.8mm Weight: 86g Speed: 8.7 Dwell/Spin: 8.8 Control: 8.7 Stiffness: 4.3 Hardness: 5.2 Value: 8.7 Overall: 9.2
Its 7 plies not 5 (checked on Donic site) Weight aprox 85g. Medium fast blade with perfect touch. Use it with medium hard/hard rubbers and U will get efect.
I bought this blade Waldner Senso Carbon (WSC) and the Waldner Ultra Senso Carbon (WUSC) at the same time and put Tibhar 5Q 2.1mm for FH side and FX-P 2.1mm for BH side on both blades. Both bare blades weight 85g so both paddles weight 178g with rubbers on. On WUSC the third, center and fourth layers have the same thickness. On WSC, the center layer is thick with 4 much thinner outer layers like regular 5 layer blades. The carbon is also next to the center layer on both blades. This comment has a lot of comparison with WUSC because I played with WUSC first. So please read my comment about WUSC also if you want to decide which blade to get.
It has a lot of feeling but less woody than WUSC because the carbon layer is very close to the surface. It feels a little more head heavy when I move the blade. I am sure it is due to the higher flex that produce more inertia. It is a bit slower than WUSC. WSC excels in different ways. It is better at low to medium gear. Short game is better than WUSC due to the flex and feeling. I can instantly adjust based on the feeling. Whenever the ball is coming a little slow I will brush a fast return to pressure the opponent Away from table it takes more effort to drive the ball. The flex offers longer dwell and higher throw angle than WUSC. Smashing is still good but feels softer than WUSC. Looping chopped ball is easier however I think the spin is a little less than WUSC and the arc is a little longer. Looping under spinning requires different stroke. I make a more direct hit close to bottom of the ball. Counter topspin is not as easy as WUSC. Overall it is a more forgiving blade then WUSC. This blade is good for player who want to try carbon blades the first time and keep improving their skill They are both great blades. I am glad I bought them together which helped me understand more about my natural style. For now I am leaning toward WUSC with softer rubber to get more wood feeling but I am keeping both of them.
this blade is not 5-plies, it is 7-plies thickness about 5.55mm (Limba0.5mm*2, Ayous0.5mm*2, Carbon0.025mm*2, Ayous center ply3.5mm). All plies made from soft wood. Overall blade is very good flex for top spin, carbon layers are very thin and placed third ply, leave blade feel natural wood and increase sweet spot. I have been using this slow carbon blade with Tenergy05 both sides its weight 177g, I feel speed medium high, spinny easy, so great all-round blade, perfect for me.
I got this blade with acuda p2 on my backhand and bluefire M1 on my forehand. For the backhand perfect in all things. For forehand really fast taking into account that is an originally off- all+.
For me it's like it is said more Off-. Good blade I will see how it goes with time. Update: absolutely perfect in everything. My flat hits with the backhand are effective and the serves have a lot of spin!
Lemn foarte bun cu un control mare, se potrivete cu multe tipuri de fee !!! Stim.
My first composite blade ever. I sticked with it for a year, then I left it for Maze Passion. My blade was 87 gr. This blade is categorised OFF-, but I rather say It is AR+ due to the soft touch and flexibility. Works well with all Bluefire rubbers, Joola MAXXX 500, Tenergy 05, DHS Tinarc 3. The main point is to equip it with nearly the same rubbers in hardness and weight, or else the blade will resonate hard. I found many times, that the blade did not had the rigidity to support a harder rubber like JP 01 when hitting. This feels like you are just hitting with the rubber surface, but where is the sponge and the power? Even with M2 the setup becomes very head heavy, which was good for my bakchand, but gave a slide curve to my forehand loops. But because the elasticity of the blade it is a very nice looping blade up to middle court with high throw and big spin. close to the table the sofness comes in handy when blocking or placing the ball. the neck of the blade is a very wide, and the handle goes in to the head deep. The head is butterfly shaped, but the handle protrudes into it 2mm. I had to sand down the neck of the blade to match the Butterfly neck shape, and the blade become a bit more flexible with even more spin. I really loved this blade, it made me feel nothing was impossible to mid distance, but after that my shots became weak. So this was the reason I went to faster blades.
Mine weighs 92gr (10 gr more than my korbel) so little dissapointed about that. . But very controlable offensive blade. not too fast. can do everything
I confess that i was expecting more. Has good control and decent speed, and is light. It's a good overall blade, but it does not excels in any aspect.
Its awesome!
As a begining pro player all I focus on is getting the ball in the table smartly. I have DHS Hurricane Neo rubbers on FH and BH. The strange part is that this blade was made i think to costum for soft rubbers, yet i put on hard chinese rubbers, and the results are awesome, specially the straight handle is my persnola favorite handle. If you are allround player like me that favors a smart play with alot of control yet want to keep the overall speed and receive(wich is like no other) u know what ima gonna say .D. Im a mix of attack8ng and receiving with a bit of chinese technic, though im a bit short of hight all i still squat and receive and push back the ball. I just love it. First love blade. Its gonna stay with me for a really long while.
This is a universal blade.almost all kind of rubbers work well on it.
I used it with seriver fx,bluefire m3 ,P7 and finally neo hurricane 3. with soft rubbers like seriver fx and m3 you have a lot of feel,control and enough spin and speed.I recommend this combo for intermediate loopers. using spiny medium hard rubbers like p7 it's a perfect looping machine capable of doing spiny serve.I found it really good when it comes to block.But my FH flat hitting was not accurate enough when I used p7 as FH rubber. Also power looping (over the table ) and doing very short spiny serve was a bit tricky so I decided to find a rubber for my FH side,The neo hurricane 3. It was my first experience with chines rubber(really hard and tacky). at first session,during the warming up,I realize that my FH counter hits become faster and more accurate.After one hour practice I was able to execute deadly loops and really spiny short services.It took 3 session to learn how to block well. therefore my perfect combination is : FH:neo Hurricane 3 (black 2.2mm) BH:Adidas P7 (red,MAX). and my last word:WSC is great blade and in case of proper set up it is capable of doing every thing you want. Update: after my playing level improved,(need for more speed), I decide to modify the senso handle. First I filled the handle with rubber sponge which result in less vibration and a little more speed in distance play(short game remain the same). second modification I've done ,was using 2 mm wood piece to fill the end of the handle,this will result in more speed with less vibration(in short play speed increase a tad with soft touch but in distance play it feels nearly stiff, and faster). Third modification was in the shape of the handle to make it more comfortable.it has a good quality wood which can be easily sand. therefore with right tool and patience you can have your own customized handle.
The word to describe this blade is "universal". Also very controlable. Not so fast itself maybe, but when combined with medium/hard tensor rubbers it makes very fast attacking weapon.
The blade is very controlable on passive game and pushes. It provides very spinny loops with softer rubbers. When under attack, this blade is great for block, counterloop or smash of opponents topspin. 
Donic Blades
Table Tennis Blades
|
