X-Treme Power Booster
by REvolution 3
Help us keep the best prices! Report a lower price.
Works great with Tenergy sponge.
Produced by the glue experts that make the popular REvolution 3 Glue.
X-Treme Power Booster is virtually VOC free* (< 4ppm), odour-free, not harmful to players, bio (natural raw materials), biodegradable and green (no toxic content).
It has a very strong boosting effect and is long-lasting. It lasts the entire life of the rubber sheet.
Watch: How to apply it:
Instructions for applying first time
There are 2 recommended methods for applying the booster:
Method A (recommended for new rubbers or rubbers with no glue residue)
If this method is applied correctly there is no need to re-tune your rubber.
1) Apply 2 layers of X-Treme Power Booster on sponge (second layer after 15 minutes).
Method B (recommended for old rubbers with glue that you cannot peel off)
1) Apply 2 layers of elastic glue on sponge, letting each layer dry completely.
1) Remove your rubber from the blade carefully, keeping the glue layer intact. Do not peel off the glue layer.
You can experiment with different layers of glue and booster until you find the right recipe that gives you the performance that suits you. If you have other method ideas, do let us know!
* A VOC-rating of < 4ppm is considered acceptable and would pass the Mini-Rae test. Remember that many rubber sheets have VOC that would fail the Mini-Rae test when opened. Remember to leave your rubber sheets open for 30 minutes when unpacking them to clear any factory VOC.
No chemical or physical treatment on rubbers is allowed according to ITTF regulations. This product is not recommended to be used in official competitions. Using the product in official competitions is the full responsibility of the player.
Customers who purchased X-Treme Power Booster also purchased:
Best Price Guarantee We guarantee to have the lowest prices (shipping included) in the US. Please tell us if you find a lower price.
Reviews of X-Treme Power Booster (3)
Add a Review for X-Treme Power Booster.
Nice and actually very powerful boost, but Falco Long gives much better control despite almost the same boost and also does clearly more impact to the sponge, at least on H3 rubber. I changed back to FL for that reason.
I boosted about 2 month old Tenergy rubbers, following the entire process (remove old glue) at first the rubber will be bounce and hard to control but if you give it like a week or few training sessions it will become AWESOME (sound, spin, etc).
It is very good booster. First time I think I followed their instructions very carefully on Tenergy 05. Two coats. Wait 12 hrs. One more coat, wait 48 hrs. Then glue with 3 coats of Revolution glue on rubber and two on the blade. It was very fast, took about a week before it settled down. Great glue sound. A lot of spin. A little wild in short game. Second time I only used two coats of booster, separated by 12 hrs, waited 24 hr and then glued. Effect was not too strong, but I have been playing well lately, so.... maybe it helped. Next time I will do it the way I did it the first time except wait four days before gluing it down.
REvolution 3 Boosters
Table Tennis Boosters