It works well. Not as easily as others, but well enough. It dries quickly. It seals very well. Please be careful if you apply two layers or more. You may have difficulty with the rubber stain glued to the blade. That happened to me, and then I had to use sandpaper to lightly remove one layer of varnish. Also, please pay attention to your blade's top ply. Depending on the type of wood used in the top ply, you may have to apply more sealant. If the top ply of your blade is a softer, more porous wood, it will be more thirsty, it will absorb the sealant more quickly and you would need to apply a little more than usual.
→ Varnish → REvolution 3 Laquer/Varnish - 30ml Reviews
→ REvolution 3 Assembly → REvolution 3 Laquer/Varnish - 30ml
5 Reviews for REvolution 3 Laquer/Varnish - 30ml
← Back to REvolution 3 Laquer/Varnish - 30ml
Easy to use, does exactly what it says. a light coat can even be used on the handle without making it slippery.
Good for keeping a blade's playing characteristics the same as well as protecting it from water based glue. use this on the handle and your handle will never get sweat stains, however it may have a glossy feel which many players dislike on a handle.
After using this on the blade face, it's a bit harder to get rubber to stick onto the blade and you may need an extra layer of glue.
After using this on the blade face, it's a bit harder to get rubber to stick onto the blade and you may need an extra layer of glue.
Does what its supposed to do. I cannot tell how much this laquer changes the characteristics of a blade. It may be too subtle, and that I'm too noob-ish.
← Back to REvolution 3 Laquer/Varnish - 30ml