IPONG Catch Net - Compact Carbon Fiber Edition
Help us keep the best prices! Report a lower price.
See also: IPONG Telescoping Pickup Net.
Clips to table frames up to 3" thick (it opens 3-1/16"). Works with all JOOLA tables we carry (25mm surface thickness). Does not work with thicker tables like the Killerspin MyT10 series, JOOLA DX30 and some Stiga models.
Ball catcher with carbon fiber frame that attaches to table edge. Ideal for robot and service practice. With a sturdy yet flexible carbon fiber frame and impermeable net, it reliably collects balls during service, multi-ball, or robot practice and saves extra time by directing balls into a readily awaiting bucket or box below the net. Moreover, additional coverage is provided with its adjustable side netting.
• Collects balls during service, multi-ball, or robot practice
Assembled dimensions are: 66" X 60" X 28"
Customers who purchased IPONG Catch Net - Compact Carbon Fiber Edition also purchased:
IPONG Comparison Chart
Best Price Guarantee
We guarantee to have the lowest prices (shipping included) in the US. Please tell us if you see a lower price.
Reviews of IPONG Catch Net - Compact Carbon Fiber Edition (16)
The net is way over priced for what you get. First is the clip go on the table are horrible and will have to be replace if you value your table. 2nd why didn’t they go 6 or so more inches and hook on to the net already in place instead of two more bad clamps and chasing balls bc you left a gap! 3. If you hit the ball hard you are chasing balls afterwards as the nets post are not covered so they bounce off or you put to much spin and it goes over the side wall. 4 if you have a table bigger than 3/4 it will be a tight fit bc remember you had to put different padding on bc theirs comes off in about 3 uses. Go buy a fishing net and some cheap fishing poles, lean the poles on the table and through the net over it and you have about the same product. Sorry just don’t wast your money here bc you have to fix their product to use it.
It does the job. Not the highest quality net ever built, but it stays on the table and catches the balls. What more do you need?
Does exactly what it is supposed to do. It was just a little confusing to set up since the directions are just pictures on the box so half star reduction. All in all a good product.
This is a great product for practicing alone or with a robot. We received one which was missing one of the rings with elastic band. The guys at megaspin.net were very responsive in sending us a replacement net.
Got this from a friend. Does not fit for a thick high end table like Butterfly Club 25. Even with max opening , the clamp is not wide enough.
might be OK for thinner tables.
Awesome net, great for service practice, easy to setup, and worth every penny. I still have mine, just no longer use it anymore because I have a robot now. But I still think this is a good alternative to buying those large rolling ball catching nets.
this is what i use as part of my practice sessions ,i use this for my serves and any other shot i need to practice
Pros: Works well and does what its purpose is too do.
Cons: Takes about 5 minutes to put up and another 5 minutes to take down. Doesn't seem long, but it is a bit of a hassle.
Final words: Works great if you can put it up and only rarely have to take it down.
A couple negatives first. Initial setup was little difficult due to lack of instruction (1/2 star subtraction). My table corner paint was scratching quite a bit with clamp on/off. I like the packaging where setup instruction printed directly on the package but I wish a few more pics would make a big difference. But, once you got it on the table, all connections make sense. Here're the four star. 1) Catch the balls well, 2) Take down and put up is manageable by one person with less than a couple minutes, 3) Quality material w.r.t to cost which I think will last for awhile, and finally I really enjoy practicing with the net on as it saves me a time and effort to collect balls.
It works but the built quality is a bit shotty. It isn't catching tennis or baseballs so it won't break or collapse. Let's just say the price matches the quality in this case.
I've only used it once for testing but it was a little bit time consuming to install and uninstall especially because of the screw on clamps to hold the net on to the table. So you must prepare for about 20~30 min to set up and break down the net and ipong machine before each session, unless you want to leave it on the table indefinitely.
Also the clamp WILL NOT work on thick tables. It just simply does not have enough room on the clamp.
Other than that it was quite usable and caught alot of balls so I didn't have to break my back picking up 100+ balls every time.
Overall, I'm pretty satisfied.
This is a pretty useful product that saves a ton of effort by letting you send a lot of your solo-training balls into a bucket for easy recycling into robot or serve practice.
It is very compact when stored and is pretty straightforward to attach to your table. It also has padded attachment points so you don't scratch up the surface.
The need that this fills is worth 10/10 but I dock stars for the following reasons:
1. I am docking half a star for some velcro attachment points on the sides of the net that catch easily on the net material itself and I can tell that this will fray the net if I am not careful when setting up the net.
2. I am docking another half star for slightly shoddy welding/metalwork in general. It is still way more structurally sound than it needs to be for TT ball impacts but you can tell it was done in a hurry and it doesn't give you a good feeling about the craftsmanship.
3. Another half star is down for advertising that it can help in multi-ball training. It is actually kinda difficult for someone to get in there on the side to do multi-ball training with you. At my local TT club, they have a homemade solution that makes a large net that also funnels balls into a bucket and the whole assembly is free-rolling on the floor so you can either put it right up against the table or you can push it backwards a bit so there is room for someone to get in there and feed multi-ball. You catch less of the balls that way but it's a nice option to have. I know that solution isn't as compact/portable but it's probably better and you could build it yourself using largely hardware store components for less $$$ than this product. However, that solution is also ugly and for my home setup this is probably the better product.
Table Tennis Robots