how do u glue new rubber (7)

how do u glue new rubber
by David 19 years ago

Re: how do u glue new rubber
by rhino 19 years ago

Re: how do u glue new rubber
by david 19 years ago

Re: how do u glue new rubber
by hiya 19 years ago

Re: how do u glue new rubber
by david 19 years ago

Re: how do u glue new rubber
by hiya 19 years ago

Re: how do u glue new rubber
by Rod 19 years ago

The following message (subject: Re: how do u glue new rubber ) was posted by Rod, on 8/17/2005 3:51:57 PM:

Depends if you want to speed glue later.

If you do. Then for the first gluing you 'Prime' the rubber with regular glue (rubber cement will do), stick on as per Rhono's instructions, but do not cut.

Leave glued for a few days. Then remove the rubber and apply speed glue, to blade and rubber, (after the rubber has finished doming)...roll the rubber on the blade,place between 2 heavy books for 15 minutes and now you can cut.....

If you cut when the rubber has been regularly glued, afterwards if you speed glue, because the rubber stretches with speed glue it will leave an overhang all round....that's why you cut it when its been speed glued.....

Hope this helps

Report Abuse