Return to Topic Index |
splintering blade (5)
splintering blade
by meee 19 years ago
by meee 19 years ago
Re: splintering blade
by cole 19 years ago
by cole 19 years ago
Re: splintering blade
by meee 19 years ago
by meee 19 years ago
Re: splintering blade
by alex 19 years ago
by alex 19 years ago
Re: splintering blade
by cole 19 years ago
by cole 19 years ago
Re: splintering blade
by meee 19 years ago
by meee 19 years ago
The following message (subject: Re: splintering blade) was posted by cole, on 3/26/2005 12:32:08 AM:
You mean the laminates are coming apart at the edges? Wow you got a real gem? Ok though...this works with crumbling balsa. Try getting some superglue and working as much of it as you can into the outer edge of the blade. With thick balsa, I actually soak them until they have a hard gloss on the outside. Cause balsa blades over like 6mm of balsa will eventually crumble otherwise without question. Maybe this will hold your plies together. |