trans





Return to Topic Index

Yasaka Extra 3D (2)

 Yasaka Extra 3D
by ShellaMae 14 years ago
Re: Yasaka Extra 3D
by gcollins 14 years ago
 Re: Yasaka Extra 3D
by ShellaMae 14 years ago
 Re: Yasaka Extra 3D
by Gene 14 years ago
 Re: Yasaka Extra 3D
by gcollins 14 years ago
 Re: Yasaka Extra 3D
by ShellaMae 14 years ago
 Re: Yasaka Extra 3D
by gcollins 14 years ago


The following message (subject: Re: Yasaka Extra 3D) was posted by gcollins, on 2/25/2005 4:45:34 PM:
I recommend that you use Minwax Wipe-on Poly. Shake the can. Moisten rag and rub on a thin coat on both sides and the edge of the blade (you should barely be able to see it). Let it dry for a few hours before you put glue on. I have found that most blade will splinter if you don't use some kind of protective coating -- especially if you change rubbers very often. You should be able to get the Minwax at WalMart.
Report Abuse
Search Forum