Rubbers for non-gluers (8)

Rubbers for non-gluers
by Zhe Min 20 years ago

bryce FX
by ak 19 years ago

Re: Rubbers for non-gluers
by Yavor 20 years ago

Re: Rubbers for non-gluers
by cole 20 years ago

Re: Rubbers for non-gluers
by Zhe Min 20 years ago

Re: Rubbers for non-gluers
by wxc 20 years ago

Re: Rubbers for non-gluers
by cole 20 years ago

Re: Rubbers for non-gluers
by Zhe Min 20 years ago

Re: Rubbers for non-gluers
by zoranv 20 years ago

Re: Rubbers for non-gluers
by Zhe Min 20 years ago

Re: Rubbers for non-gluers
by cole 20 years ago

Re: Rubbers for non-gluers
by zoranv 20 years ago

Re: Rubbers for non-gluers
by Zhe Min 20 years ago

Re: Rubbers for non-gluers
by ak 19 years ago

The following message (subject: Re: Rubbers for non-gluers) was posted by Zhe Min, on 6/18/2004 5:19:28 AM:

Thanks for your suggestions Cole, unfortunately I can only get rubbers within New Zealand and they don't stock Armstrong or Dynasty rubbers. However they do stock Catapult, but I've heard that it lacks spin compared to other high-tech rubbers. I've tried Mark V and it was quite a good rubber on my Taksim blade but I found that its not fast enough and it also lacked a bit of spin. From the looks of it, it'll be done to either Joola Tango, Joola Tango Xtreme, Yasaka V-Stage or Sriver G2. Could you give me the better choice out of those rubbers please? Thanks, much appreciated.

Advertisement: Order Butterfly Rubber
Megaspin.net store

Report Abuse