Return to Topic Index |
729 6040 blade st (5)
729 6040 blade st
by zoranv 20 years ago
by zoranv 20 years ago
Re: 729 6040 blade st
by cole 20 years ago
by cole 20 years ago
Re: 729 6040 blade st
by zoranv 20 years ago
by zoranv 20 years ago
Re: 729 6040 blade st
by alphapong 20 years ago
by alphapong 20 years ago
Re: 729 6040 blade st
by zoranv 20 years ago
by zoranv 20 years ago
Re: 729 6040 blade st
by zoranv 20 years ago
by zoranv 20 years ago
Re: 729 6040 blade st
by ZoranV 20 years ago
by ZoranV 20 years ago
Re: 729 6040 blade st
by wells05 20 years ago
by wells05 20 years ago
Re: 729 6040 blade st
by ZoranV 20 years ago
by ZoranV 20 years ago
Re: 729 6040 blade st
by wells05 20 years ago
by wells05 20 years ago
The following message (subject: Re: 729 6040 blade st) was posted by alphapong, on 9/9/2004 2:31:35 AM:
I have a few of these blades. I think this blade was the replacement for the old 302 all-round. It is a bit lighter at 82g. The 6040 blades I received were not 7 ply they were 5 ply. Good control, but you would need some very fast glue / rubber for this blade if you wanted to be very offensive with it. Dave |