Sponge (3)

Sponge
by Tim 19 years ago

Re: Sponge
by debraj 19 years ago

Re: Sponge
by Mike Oxbent 19 years ago

Re: Sponge
by Tim 19 years ago

The following message (subject: Re: Sponge) was posted by Mike Oxbent, on 3/16/2007 7:54:09 PM:

The total thickness of the topsheet+sponge must be no more than 4mm, so the maximum thickness of the sponge depends on the thickness of the topsheet for a particular rubber.

Report Abuse