Making My own Paddle (2)

Making My own Paddle
by Tyler 22 years ago

Re: Making My own Paddle
by Yves 22 years ago

Re: Making My own Paddle
by tyler 22 years ago

The following message (subject: Re: Making My own Paddle) was posted by Yves, on 12/25/2004 11:29:20 AM:

Put some glue on the sponge of one rubber, then put some glue on one side of the blade. Wait a few minutes until the glue has soaked into the sponge before bringing both glued sides together. You can use a rolling pin to put equal pressure across the rubber. Now you can start with the other one.

Report Abuse