trans





Return to Topic Index

dimensions (11)

 dimensions
by jabyn 16 years ago
 Re: dimensions
by Adham Shahara 16 years ago
 Re: dimensions
by Woody 16 years ago
 Color
by Jason 15 years ago
 Re: dimensions
by joe roth 16 years ago
 Re: dimensions
by ghil 16 years ago
 Re: dimensions
by Matt 16 years ago
 Re: dimensions
by seepee 15 years ago
 Re: dimensions
by subhashgarg 15 years ago
Re: dimensions
by Kalpesh 15 years ago


The following message (subject: Re: dimensions) was posted by Kalpesh, on 10/6/2004 12:56:51 AM:
The upper surface of the table, known as the playing surface, shall be rectangular, 2.74m long and 1.525m wide, and shall lie in a horizontal plane 76cm above the floor. 7/15/2003
2.01.02 The playing surface shall not include the vertical sides of the tabletop. 7/15/2003
2.01.03 The playing surface may be of any material and shall yield a uniform bounce of about 23cm when a standard ball is dropped on to it from a height of 30cm. 7/15/2003
2.01.04 The playing surface shall be uniformly dark coloured and matt, but with a white side line, 2cm wide, along each 2.74m edge and a white end line, 2cm wide, along each 1.525m edge. 7/15/2003
2.01.05 The playing surface shall be divided into 2 equal courts by a vertical net running parallel with the end lines, and shall be continuous over the whole area of each court. 7/15/2003
2.01.06 For doubles, each court shall be divided into 2 equal half-courts by a white centre line, 3mm wide, running parallel with the side lines; the centre line shall be regarded as part of each right half-court.
Report Abuse
Search Forum