Free US Shipping over $50
Thousands of satisfied customers
Best Price Guarantee
Home Rubber
 → High Speed Rubber → Nittaku Fastarc C-1 Reviews
 → Nittaku Rubber → Nittaku Fastarc C-1

31 Reviews for Nittaku Fastarc C-1

← Back to Nittaku Fastarc C-1

Sort by Most Useful | Most Recent
Add a Review
Best rubber ever, must try, little brother of tenergy 05, more control, less speed, better than g1, and that is greast rubber, highly recommended.
Review helpful?    Yes | No

I use this rubber after FastArc G1, Xiom Omega V pro, Xiom Omega VII, Thibar MX-S. Compared to Omega V Pro, let say that C1 is Mark V : no catapult effect, soft contact, ball on table. Compared to MX-S : if you are rightly placed and manage the low throw, MX-S will allow you to kill the point with a sure winner. C1 is slower. But C1 is much easier to use in all sorts of situations, and allows also to score winners, because the ball has got rotation and you can get angles. C1 is very much controlled, still fast. Lower throw than G1, but not low. Block is ok. Service is good. Chop is very good. And touch play at the net is extremely easy. The rubber is not bouncy so one can play with ease very short strokes, as well as long ones. The rubber is a tensor that does not feel like a tensor. The plus compared to G1 is the softness that allows for more rotation, more angles, and more control. In the end, I can play more aggressively and on occasion faster than I would play with G1. At the beginning, I was longing for FastArc G1 remarkable pace and high throw. But after a period of adaptation, I do not regret to have moved to C1.
Review helpful?    Yes | No

Great Rubber for the BH
Review helpful?    Yes | No

High quality rubber. Sponge is hard enough to produce a lot of speed but the rubber is quite soft what is giving good amount of control what is especially noticable in active block/smashes. I had problems only to used to FH topspin-topspin attacks but it's maybe caused by jump from tacky chinese type rubber. Overall It's worth money.
Review helpful?    Yes | No

I dont know why some people say that it is inferior to G-1. Its same top sheet. Being a bit softer than G-1, 45 degrees (not a soft rubber) it is a little slower than G-1. But still fast. Still great spin. Durability is best with G-1. Not bouncy like some tensor runners. Superb control. Best BH. Though I loved it on FH too. One of the best.
Review helpful?    Yes | No

I use Nittaku Fastarc C-1 on my backhand.
It took me only about ten hours of play to adjust my habits after change my Andro Hexer Grip SFX to this Nittaku rubber. And I dont want to come back to Andro, in spite of I really liked it before, because in my opinion, the Nittaku Fastarc C-1 is at least as good as Andro Hexer Grip SFX in close to table play and no doubt is much better in mid distance strikes.
Of course I know there are exists faster, spinnier and more dangerous rubbers for my opponents, but for 47 years old amateur player as I am, I think that Nittaku Fastarc C-1 is an ideal option.
I have a lot of control, quite good amount of spin and nice level of speed I'm able to handle. And what is the most important I can create various types of strikes and have a really huge fun of play.
Nittaku Fastarc C-1 is very stable and repeatable in close to table play. Blocks are easy and I have full control to place the ball where I want. My hits are not too slow, so there are not too easy to pick up for my opponent. The amount of spin I can create is a bit lower than with Andro Hexer Grip SFX but still is really good and on the other hand I have no problem to handle the incoming rotation.
When playing further away from the table, I have enough power and control at the same time, and changing/reversing of incoming rotation is not a big deal.
With the Nittaku Fastarc C-1 I can effectively do all sorts of serves - short, long, forwardspin, backspin, sidespin, no spin... It's really simple.
And one more very important thing for me - as I wrote above - I don't like the catapult effect, which is characteristic of many modern rubbers, so I'm glad that with this rubber it is practically unnoticeable.
Review helpful?    Yes | No

I have used both this rubber and Fastarc G-1 at 2.0mm on the Nittaku Acoustic and personally prefer the C-1 over the G-1 for my current level. I am USATT 1700 offensive looper and the C-1 gives me more forgiveness, dwell, and control on my shots. I did notice it was more insensitive to spin than G-1, which made it less effort to loop an underspin ball. Overall, I did not notice too much difference in speed/spin. Both are good offensive rubbers. I am still able to make strong winners against my opponent and this rubber plays great away from the table. I'd say if you're debating on whether to choose between C-1 or G-1, choose C-1 if you need the added control and choose G-1 if you want the slight increase in speed/spin. For me, this is definitely my new favorite rubber.
Review helpful?    Yes | No

Very good for backhand. it has huge amounts of spin. Good for an allround playing style.
Review helpful?    Yes | No

Good offensive rubber for forehand, not very tacky and not very spinny but it's great weapon when you get use to it and make the strokes right.
Review helpful?    Yes | No

Je suis class 13. je jour principalement en attaque CD base de top spin. j'ai jou avec le G1 en 1.4 mm en revers sur un bois Petr Korbel (moyennement dur). j'ai ador jou avec car il m'a procur beaucoup de contrle avec la mousse en 1.4 mm. J'ai progress dans mon jeu et cela m'a donn plus confiance pour poursuivre et dveloppe mon jeu ct revers qui est mon gros point faible. je suis pass au C1 en 1.8 mm (avec bois plus tendre que le Petr Korbel, un Nitakku Latika Light) pour 2 raisons. le rejet du G1 est tellement haut que mes retours de service l'taient galement engendrant des difficults dans la suite du jeu et permettant l'adversaire de prendre le jeu son compte. Enfin, avec le C1 je peux mieux contrler, la mousse tant plus tendre. Le rejet est tout fait correct.
Review helpful?    Yes | No

Do it all rubber.
I like i can feel my blade with this rubber more than any others .
Meaty top sheet and very durable.
Phenomenal spin and control, not speed monster but fast enough even for forehand ..
Lifting backspin balls is very easy ..
Blocking is also easy, serves are spinny , very rounded rubber. Nice speed glue sound ..
On a acoustic carbon inner on a backhand side very nice to control ..
Recommended 10/10
Review helpful?    Yes | No

I play the C1 on fh and bh in 1.8 for some weeks now and right from the start I was surprised how controlled it is. It suits perfectly my allround game, creates lots of spin and is quite fast. Its also great for blocking thanks to the medium hard sponge (45 degrees). What I also like is that its quite light (cut to an BTY ony 43g). I used to play Andro Hexer Duro before which is a fast allround rubber but the C1 takes the lead in almost all disciplines. Id recommend it to offensive allround players and it works best on stiffer blades.
Review helpful?    Yes | No

UPDATE from 12/2021:
Although I have actually excellent experiences with the Fastarc G1 (... on my Stuor Nobilis Hinoki ZLC blade, FH side), I had to try a slightly softer rubber again !!!
Facts: C-1 in black, Super Thick (2 mm), sponge hardness 45 degree. Weight in orig. packing 95 g, uncut 65 g, on my blade (157 x 150 mm) 45 g.
This softer version of the G-1 (- same top sheet!) has more catapult as the G-1. The spin development is not far away from the G-1 and too on a very high level.
Although I have actually excellent experiences with the Fastarc G1 (- ... in connection with my Stuor Nobilis Hinoki ZLC blade, at my FH), I definitely had to try a slightly softer rubber again!
This softer version of the G-1 (- same top sheet!) creates in the short game more speed (catapult) as the G-1.
The spin development is not far away from the G-1 and too on a very high level. With the G-1 the topspin jumps out much flatter !!! ... on the other hand, the "angle play" with the C-1 is more difficult. In the end, I had the impression in many game situations that the C-1 was more "forgiving" and gives my game more security !!!
CONCLUSION: this C-1 is the best rubber with a 45 degree sponge that I have played so far. (- however, there weren't that many either. ;-P ) - definitely try it !!!
( - if you like more informations, about this rubber ... https://www.tt-spin.de/nittaku-fastarc-c-1/ )
Adendum: I recently became the proud owner of a Butterfly Zhang Jike TAMCA 5000. This blade, slower than my Stuor Nobilis, offers a significantly better performance ( ... together with the C-1), as it clearly needs catapult-stronger rubber (... than the G-1). - so I am also well advised (on my BH side) with the 45 degree hard Tibhar Aurus Select (in 1.7 mm) !!!
- a dreamlike combination. :-P
... next I will review the Aurus Select
Review helpful?    Yes | No

I would say, this is a reference training rubber in its best possible meaning /I give a bat with this rubber on both sides to my training partners, and they seem to well acknowledge its qualities/. The topsheet is not tacky at all as I can tell, but has a surface with surprisingly good grip, which lasts for a very long time (however, the edge is a little bit prone to chipping, if it is not protected by a properly chosen edge tape). The rubber feels a bit harder than the specified ESN 45 degree, possibly due to its relatively hard and thick topsheet. I could not observe any difference in playing characteristics of the rubber even after months of usage, which is a very big plus for me. The rubber response feels very linear on almost every stroke, which gives great precision in placement. The rubber is only moderately bouncy in the low gears, but speeds up noticeably when more force is applied (employing the sponge gives a good gradual speed boost without any sudden changes). On the lightest touches, the rubber has almost no catapult, so you have to be a bit more mindful regarding placement (counting on off-balance shots is possible, but they are not really effective) and confident in executing your shots - but once accustomed to it, you will be rewarded with great short play precision, and your shot quality will develop as well (the rubber will definitely 'tell' you if you execute your shots correctly, but it is also forgiving to some extent). Brush loops are relatively easy to execute - the produced spin is very good, but I know a few better rubbers to pressurize the opponent with spin. Usually, the produced arcs are safe enough to clear the net easily, but not largely. On the strongest counterhits, the rubber starts to behave noticeably differently (due to the start of bottoming out?), but it is still possible to calculate the proper bat angles. Sensitivity to spin of incoming ball can be felt to some healthy, but manageable extent. Very good value for price.
Review helpful?    Yes | No

Need a power and right technique to able get real performance from this rubber. If you dont have a power and right technique i think this have performance just like ordinary cheap rubber.
Review helpful?    Yes | No

Used for BH rubber on Andro Timber blade and now test on TMOUNT ( Korean)
TCORE 560 Blade.
Review helpful?    Yes | No

Really great for bh.
Review helpful?    Yes | No

Softer version of Fastarc G1, best for backhand, love this rubber.
Review helpful?    Yes | No

Fast, spinny yet controllable rubber
Review helpful?    Yes | No

Among the most sold rubber in the world: https://world-tt.com/ps_goods/goods_ranking.php

Whole Asian, every major store counts
Review helpful?    Yes | No

Little brother to Fastarc G1. Talked to alot of people here in the club, and everybody is confused by the poor reviews here. It is the 4th most sold rubber in Asia goddammit!
Review helpful?    Yes | No

Wow, never have i played with such accuracy! The spin here is totally wrong. This is made after G1 but is a softer rubber with enourmus spin. Long contact, almost sticky. I saw it was the third most sold rubber in Asia. And that means pretty much the world. Fastarc G1 still in top with Roozena and 05, then CI. Here is the list over most sold rubber in Asia Top Ten: https://world-tt.com/ps_goods/goods_ranking.php 3 Yasaka and 3 Nittaku among top ten! Butterfly, are we a little bit too expensive maybe??? (:-
Review helpful?    Yes | No

This sponge is firm. The topsheet is medium only for a couple of days then it becomes firmer. The topsheet has medium spin. Speed is slow like a sriver. I do not recommend.
Review helpful?    Yes | No

katapultossabb
Lassabb mint a fastarc g 1 hasonl tulajdonsgokkal kicsit katapultossabb
Slower than fastarc g 1 with a bit more catapult with similar properties
Review helpful?    Yes | No

This superb rubber is totally underrated here! If you speak German go to Marcel's German tt-spin blog and read his review. He compares it to EL-S and Vega Japan in terms of spin arc. While EL-S seems to be more aggressive, C-1 seems to give quite a bit of stability. From my point of view, you can achieve better angles with C-1 than with, say EL-P. Usually, I play Evolution EL-P, Vega Japan or FX-S on my forehand. While EL-P is too hard for me in certain situations and FX-S is too soft or not powerful enough, Fastarc C-1 is like a good blend between these two and plays like a Japanese rubber. I also think it behaves in a very linear way and placement is better than with other high tech rubbers. You always feel like you are in control of your shots and your shots can also be as vicious as with other powerful rubbers. Am using Tenergy 25FX on my backhand and have tried C-1 in backhand opening loops, too, which also works greatly. However, 25FX will stay on my backhand, because C-1 is a little too aggressive for the job. Highly recommended!
Review helpful?    Yes | No

It is very versatile rubber with soft feeling. Great speed and great spin. Moreover it has good range of gear, it mean you are able make a drop shot with ease and when you hit hard it can generate enormous speed and spin. For me it a lil bit too soft may be a harder one will be better cuz sometime it bottom out too fast.
If compare to T64, this one is a lil bit harder (but still a lot softer than 05) better gear, and thanks to sligtly tacky surface it grip the ball very well either mechanic or tackiness. Despite it has slightly tackiness topsheet, this one do not that sentitive to spin, let say around Mark V level.
Review helpful?    Yes | No

When I first used this it was quite fast. I bought it with the S-1. The S-1 is still very fast where as this has just completely lost its speed. It is now pretty much a stock Sriver/Sriver FX. I think this is the same as Tenergy 80; the mediocre failure between the two greats (T05 & T64 : G-1 & S-1). Don't bother with this -> Just stick to G-1 for forehand & S-1 for backhand if you need something faster.
Review helpful?    Yes | No

Best forehand rubber... Good consistency in Smash, Loop, Drive, Block, n' Push... Use on Medium Hard Blade...
Review helpful?    Yes | No

Great allround rubber. Slightly faster than non-tensor rubber like sriver, not too fast. Great for close to the table and mid distant. Can loop, drive, hit, push, block and flick. Not too sensitive to incoming spin. Serve is average but good enough. This will be a good choice for those wanting to try tensor rubber but afraid it is too fast for them to handle. If you can play with sriver, you can play with this rubber and you will have more speed.
Review helpful?    Yes | No

Used 2.0 on BH. You need technique to make this perform well, but after that, you will be rewarded. This is like a universal rubber. You can go on the offensive or play defensively when you need to. Nittaku wasn't kidding when they said "create artistic shots."
Review helpful?    Yes | No

Review is based on 2.0mm red. Quite nice rubber, made in German, Japanese brand. Can be used for forehand and backhand.

Good for brushing and straight hitting. Can generate decent top spin, flat shots, good push to name a few. It is decently fast which means you need good hitting techniques and good blade combination to produce faster shots.

Great rubber for players who want to develop their techniques.

Combines well with the G-1 as forehand.

Downside is the edge is quite brittle, so parts will come off easily. But this is quite normal with tensor rubber.
Review helpful?    Yes | No

← Back to Nittaku Fastarc C-1